|
|
 |
PLC-WTC500L
|
Click to enlarge
|
View accessories
for this product
View product
spec sheet
|
The Industry’s First Auto Lamp Selection System
Incorporates industry’s first lamp selection system. Lamp selection system makes
it possible for approximately 6,000 hours of projection. This eliminates the need
to stock up on spare lamps far in advance, which makes it easy on limited budgets.
The Alternating Mode allows a rotating pattern alternating the two lamps’ use time
by selecting the lamp with the lower amount of use. This mode creates the
balance between the lamps resulting in a combined lamp operation which is twice
as long as conventional one-lamp models. The Relay Mode uses one lamp up to
the recommended lamp replacement time, then it automatically switches to the
second lamp. If the first lamp’s life is fully used, the next lamp automatically takes
over, allowing for uninterrupted presentations. Another optional lamp extension
method utilizes “lamp switch function” which you can set the timer to rotate each
lamp every one to 24 hours, and Sanyo’s “PJ Net Organizer” can schedule the
lamp rotation date and time. In order to use the projector for 24/7 continuous
operation, the timer must be set to switch lamps every 24 hours. 24/7 continuous
operation is useful for signage, advertising and information boards.
|
|
|
| Key Information |
| Resolution |
1280 x 800 (16:10) |
| Display Type |
0.95” TFT P-Si x 3 |
| Brightness |
5000 ANSI Lumens |
| Weight |
32.4 lbs. |
| Contrast |
3000:1 |
| Warranty |
Three Years, Parts and Labor |
|
| Image Quality |
|
| Resolution |
1280 x 800 (16:10) |
| Brightness |
5000 ANSI Lumens |
| Contrast Ratio |
3000:1 |
| Uniformity |
90% |
| No. of Colors |
16.7 million |
| Aspect Ratio(s) |
16:10 (Native) 4:3, 16:9, 16:10 (Supported) |
| Display Type |
0.95” TFT P-Si x 3 |
|
| Compatibility |
|
| Data Signals |
VGA - UXGA, Mac |
| Video Signals |
NTSC/PAL/SECAM/480i/480p,
HDTV (720p, 1080i) |
| H Sync |
15 ~ 100 kHz |
| V Sync |
50 ~ 100 Hz |
|
| Connectivity |
|
| Inputs |
1 x HDMI,
5 x BNC,
1 x 15-pin RGB,
2 x Stereo Mini Jack (Audio),
1 x Component Video (3 BNC),
1 x Composite Video (1 BNC),
1 x Composite Video (RCA)
1 x S-Video,
1 x Stereo Audio (2 RCA),
1 x USB Type B,
1 x RS-232,
1 x Stereo Mini Jack for Rem |
| Outputs |
1 x Stereo Mini Jack,
1 x 15-pin RGB,
|
| Built-in Audio |
2 x 3W Mono |
| Projection Lens |
|
| Lens |
None Included |
| Image Size |
Varies with Lens installed |
| Throw Distance |
Varies with Lens installed |
| Throw Ratio |
Varies with Lens installed |
| Keystone Correction |
+/- 20 Deg (Horiz), +/- 40 Deg (vert) |
| Lens Shift |
|
| Projection Methods |
Front, Rear, Ceiling, Rear Ceiling |
|
| Size |
|
| Dimensions |
17.76” x 6.89” x 21.66” (WxHxD) |
| Unit Weight |
32.4 lbs |
|
| Operation |
|
| Lamp |
330W NSHA |
| Lamp Life |
2000 hours |
| Items Included |
1) Owner's Manual (CD-ROM) 2) AC code UL 3P Plug Type
3) PC Cable (Dsub15-Dsub 15) 4) USB Cable 5)Wireless/
Wired Remote Control 6) AAA Battery x 2 7) Pin Code label |
| Remote Control |
|
| Carry Case Included |
|
| Econo Mode |
|
| Econo Mode Lamp Hours |
4000 Hours |
| Power Consumption |
420W(Eco1) |
| Audible Noise |
31dB (Eco1) |
| Power Supply |
100-240 VAC,
50/60 Hz |
|
| Warranty |
|
| Projector |
Three Years, Parts and Labor |
|
|
)
